RM35TM50MW Schneider Electric motor voltage and temperature control relay - RM35-T - 24..240 V AC/DC - 2 NO

shoe image
shoe image

RM35TM50MW Schneider Electric motor voltage and temperature control relay - RM35-T - 24..240 V AC/DC - 2 NO

Old Price: AED 418.050

New Price: AED 415.000 (1%)


This Harmony RM35-T control relay allows monitoring of motor voltage and temperature control. This modular control relay is ideal for monitoring of electrical values with voltage and temperature variation in control of moving equipment's. It applies to a wide type of industrial automation applications such as hoisting, packaging, lifts, textile, water. It has one of market medium form-factors with 35mm width, allowing for a flexible and easy installation on DIN rail, using the same space as any modular 3-pole DIN device. It also offers a selectable memory function, integral LED for indicating control status, sealable cover, with simple and precise settings with screw trimmers. It provides automatic shutdown management and fault information to user for a quick fault identification and troubleshooting. Multi function controller for wide choice selected in hard-wired logic automated systems, ideal for refurbishment of old installations without using a PLC.

Range of productHarmony Control Relays
Relay typeMotor temperature control relay
Product or component typeMotor temperature control relay
Relay nameRM35TM
Relay monitored parametersPhase sequence
Motor temperature via PTC probe
Phase failure detection
Measurement range208...480 V AC
15...3100 Ohm
time delayWithout
Output contacts2 NO
nominal output current5 A
Contacts type and composition2 NO
[Uc] control circuit voltage24...240 V
Product specific applicationFor 3-phase supply
[Un] rated nominal voltage24...240 V AC/DC 50/60 Hz, non self-powered
Supply voltage limits20.4…264 V AC
20.4…264 V DC
Reset time10000 ms output
Maximum switching voltage250 V AC
250 V DC
Switching capacity in VA1250 VA
Minimum switching current10 mA at 5 V DC
Maximum switching current5 A AC
5 A DC
Power consumption in VA0…4 VA at 24...240 V AC
power consumption0.5 W DC
Control circuit frequency50...60 Hz +/- 10 %
Resistance across terminals602 mOhm
Measurement voltage limits176…528 V AC
delay at power up500 ms
Voltage range176...528 V
Response time> 50 ms (input Y1 (contact Y1-T1) and push-button)
[Uc] control circuit voltage<= 3.6 V of temperature control circuit (T1-T2 terminals open)
Short-circuit current0.007 A temperature sensing circuit (T1-T2 terminals short circuited)
Maximum resistance1500 Ohm for temperature sensor at 20 °C
Tripping threshold3100 Ohm +/- 10 % for temperature control circuit
Reset threshold1650 Ohm +/- 10 % for temperature control circuit
Insulation resistance> 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60255-5
> 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60664-1
> 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60255-5
> 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60664-1
> 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5
> 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1
[Ui] rated insulation voltage400 V conforming to IEC 60664-1
Supply frequency50/60 Hz +/- 10 %
Operating positionAny position without derating
Connections - terminalsScrew terminals, 1 x 0.5...1 x 4 mm² (AWG 20...AWG 11) solid without cable end
Screw terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) solid without cable end
Screw terminals, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 12) flexible with cable end
Screw terminals, 2 x 0.2...2 x 1.5 mm² (AWG 24...AWG 16) flexible with cable end
Tightening torque0.6…1 N.m conforming to IEC 60947-1
Housing materialSelf-extinguishing plastic
Local signallingLED (green) for power ON
LED (yellow) for phase of relay (R2)
LED (yellow) for temperature of relay (R1)
Mounting support35 mm symmetrical DIN rail conforming to IEC 60715
Electrical durability10000 cycles
Mechanical durability30000000 cycles
Operating rate<= 360 operations/hour full load
Utilisation categoryAC-12 conforming to IEC 60947-5-1
AC-13 conforming to IEC 60947-5-1
AC-14 conforming to IEC 60947-5-1
AC-15 conforming to IEC 60947-5-1
DC-12 conforming to IEC 60947-5-1
DC-13 conforming to IEC 60947-5-1
Width35 mm
Product weight0.13 kg
control typeWithout test button
Immunity to microbreaks20 ms at 20.4 V
Electromagnetic compatibilityEmission standard for industrial environments conforming to IEC 61000-6-4
Emission standard for residential, commercial and light-industrial environments conforming to IEC 61000-6-3
Immunity for industrial environments conforming to IEC 61000-6-2
StandardsIEC 60255-6
IEC 60034-11-2
Product certificationsGL
UL
GOST
C-Tick
CSA
MarkingCE
Directives73/23/EEC - low voltage directive
89/336/EEC - electromagnetic compatibility
Ambient air temperature for storage-40…70 °C
Ambient air temperature for operation-20…50 °C
Relative humidity95 % at 55 °C conforming to IEC 60068-2-30
Vibration resistance0.35 mm (f= 5…57.6 Hz) conforming to IEC 60068-2-6
1 gn (f= 57.6…150 Hz) conforming to IEC 60255-21-1
Shock resistance15 gn for 11 ms conforming to IEC 60255-21-1
IP degree of protectionIP20 (terminals) conforming to IEC 60529
IP30 (casing) conforming to IEC 60529
Pollution degree3 conforming to IEC 60664-1
Overvoltage categoryIII conforming to IEC 60664-1
Dielectric test voltage2 kV, 1 min AC 50 Hz
Non-dissipating shock wave4 kV
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height4.300 cm
Package 1 Width7.800 cm
Package 1 Length9.500 cm
Package 1 Weight127.000 g
Unit Type of Package 2S03
Number of Units in Package 248
Package 2 Height30.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight6.900 kg
Warranty18 months

 

 

 

 

You may also like

RE22R2AMR Schneider Electric
AED 290.870 AED 288.750

RE22R2AMR Schneider Electric

Shopping Bag

Cart Is Empty
View shopping cart
Electrical eShope
© 2026 Electrical eShope .
All right reserved. Designed & Developed by Webs Utility