RM35LM33MW Schneider Electric level control relay, Harmony Control Relays, 5A, 2CO, 24...240V AC DC

shoe image
shoe image

RM35LM33MW Schneider Electric level control relay, Harmony Control Relays, 5A, 2CO, 24...240V AC DC

Old Price: AED 292.920

New Price: AED 289.750 (1%)

This Harmony RM35-LM relay allows monitoring of level control in 3-phase networks. This modular multi function 3-phase liquid level control relay is ideal for monitoring of electrical values in industrial and building control panels. It applies to a wide type of industrial automation applications such as hoisting, packaging, lifts, textile, water. It has one of market medium form-factors with 35mm width, allowing for a flexible and easy installation on DIN rail, using the same space as any modular 3-pole DIN device. It also offers a sealable cover, simple and precise settings with screw trimmers. It provides automatic shutdown management and fault information to user for a quick fault identification and troubleshooting. multi function controller for wide choice selected in hard-wired logic automated systems, ideal for refurbishment of old installations without using a PLC.

Range of productHarmony Control Relays
Relay typeLevel control relay
Product or component typeLevel control relay
Relay nameRM35L
Relay monitored parametersDetection by resistive probes
time delayAdjustable 0.1...5 s, +/- 10 % Tt- time delay upon fault
Switching capacity in VA1250 VA
Minimum switching current10 mA at 5 V DC
Maximum switching current5 A AC/DC
power consumption5 VA AC
Measurement range250 Ohm...1 MOhm
Utilisation categoryAC-12 conforming to IEC 60947-5-1
AC-13 conforming to IEC 60947-5-1
AC-14 conforming to IEC 60947-5-1
AC-15 conforming to IEC 60947-5-1
DC-12 conforming to IEC 60947-5-1
DC-13 conforming to IEC 60947-5-1
Contacts type and composition2 C/O
Reset time1750 ms
Maximum switching voltage250 V AC/DC
[Un] rated nominal voltage24...240 V AC/DC 50/60 Hz, non self-powered
Supply voltage limits20.4…264 V AC/DC
operating voltage tolerance- 15 % + 10 % Un
power consumption1.5 W DC
Output contacts2 C/O
nominal output current5 A
delay at power up0.6 s
Measurement accuracy+/- 10 % of the full scale value
+/- 20 % for the HS range
Repeat accuracy+/- 2 % for time delay
Measurement error0.5 %/°C with temperature variation
Sensitivity scale0.25...5 kOhm LS (Low Sensitivity)
5...100 kOhm St (Standard Sensitivity)
50...1000 kOhm HS (High Sensitivity)
Sensitivity adjustment5…100 %
Maximum supply current for sensors1 mA
Cable capacitance1 nF at HS (High Sensitivity) for probe cable
2.2 nF at St (Standard Sensitivity) for probe cable
4.7 nF at LS (Low Sensitivity)
MarkingCE : 73/23/EEC
CE : EMC 89/336/EEC
Overvoltage categoryIII conforming to IEC 60664-1
Insulation resistance> 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60255-5
> 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60664-1
> 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60255-5
> 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60664-1
> 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5
> 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1
[Ui] rated insulation voltage250 V conforming to IEC 60664-1
Operating positionAny position without derating
Connections - terminalsScrew terminals, 1 x 0.5...1 x 4 mm² (AWG 20...AWG 11) solid without cable end
Screw terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) solid without cable end
Screw terminals, 2 x 0.2...2 x 1.5 mm² (AWG 24...AWG 16) flexible with cable end
Screw terminals, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 12) flexible with cable end
Tightening torque0.6…1 N.m conforming to IEC 60947-1
Housing materialSelf-extinguishing plastic
Local signallingLED (yellow) for relay ON
LED (green) for power ON
LED (yellow) for timer ON
Mounting support35 mm symmetrical DIN rail conforming to IEC 60715
Electrical durability100000 cycles
Mechanical durability30000000 cycles
Operating rate<= 360 operations/hour full load
Measurement range0.25...1000 kOhm
Safety reliability dataB10d = 170000
MTTFd = 182.6 years
Width35 mm
control typeWithout test button
Immunity to microbreaks100 ms DC
90 ms AC
Electromagnetic compatibilityEmission standard for industrial environments conforming to IEC 61000-6-4
Emission standard for residential, commercial and light-industrial environments conforming to IEC 61000-6-3
Immunity for industrial environments conforming to NF EN/IEC 61000-6-2
StandardsIEC 60255-6
Product certificationsCSA
GL
UL
C-Tick
GOST
Ambient air temperature for storage-40…70 °C
Ambient air temperature for operation-20…50 °C
Relative humidity95 % at 55 °C conforming to IEC 60068-2-30
IP degree of protectionIP20 (terminals) conforming to IEC 60529
IP30 (casing) conforming to IEC 60529
Pollution degree3 conforming to IEC 60664-1
Dielectric test voltage2 kV, 1 min AC 50 Hz conforming to IEC 60255-5
2 kV, 1 min AC 50 Hz conforming to IEC 60664-1
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Height4.400 cm
Package 1 Width7.800 cm
Package 1 Length9.500 cm
Package 1 Weight134.000 g
Unit Type of Package 2S03
Number of Units in Package 248
Package 2 Height30.000 cm
Package 2 Width30.000 cm
Package 2 Length40.000 cm
Package 2 Weight7.155 kg
Unit Type of Package 3P06
Number of Units in Package 3384
Package 3 Height75.000 cm
Package 3 Width60.000 cm
Package 3 Length80.000 cm
Package 3 Weight65.660 kg
Warranty18 months

 

 


 

You may also like

RE22R2AMR Schneider Electric
AED 290.870 AED 288.750

RE22R2AMR Schneider Electric

Shopping Bag

Cart Is Empty
View shopping cart
Electrical eShope
© 2025 Electrical eShope .
All right reserved. Designed & Developed by Webs Utility