Electrical eShope

METSEPM1125HCL10RS Schneider Electric EasyLogic panel mount meter, class 1, RS485, LED

Old Price: AED 495.800

New Price: AED 491.750 (1%)

Activity	DPLVP
Part Number	METSEPM1125HCL10RS
Type of measurement	current, voltage, frequency, power factor, phase angle, RPM, peak demand power, harmonic distorsion (I THD & U THD), active power, active energy
Accuracy class	class 1 active energy conforming to IEC 62053-21, class 1 reactive energy conforming to IEC 62053-24
Communication port support	screw connector: RS485
Power quality analysis	total harmonic distortion
Measurement voltage	46-277 V AC 50...60 Hz between phase and neutral, 80-480 V AC 50...60 Hz between phases, 277-999000 V AC 50...60 Hz with external VT
Sampling rate	32 samples/cycle
Maximum power consumption in W	2 W at 240 V
Frequency measurement range	45-65 Hz
Counter functions	ON hour counting, ON-load hour counting, power interruption
Communication of data	reading of measurements, all counters, revolution speed, last cleared log, instantaneous and demand values
Tamperproof of settings	protected by access code
Measurement current	5-6000 mA
Messages display capacity	3 fields of 4 characters
Refresh time	1 s
Data recording	energy consumption logs
Display colour	red
Analogue input type	voltage (impedance 5 MOhm)4 x , current 0.005...10 A (impedance 0.3 MOhm)6 x
Measurement category	category III 480-480 V
Display digits	12 digit(s) - 14.2 mm in height
Metering type	average current Iavg, phase currents, active power P, P1, P2, P3, active, reactive, apparent energy (signed, four quadrant), rotation speed, average voltage Vavg, calculated neutral current, unbalance current, apparent power S, S1, S2, S3, unbalance voltage, frequency, voltage U21, U32, U13, V1, V2, V3, demand power P, Q, S, reactive power Q, Q1, Q2, Q3, power factor and displacement PF (signed, four quadrant), phase current I1, I2, I3 RMS
Maximum power consumption in VA	4 VA at 240 V between phase and neutral
Installation category	III
standards	IEC 61010-1:ed. 3, UL 61010-1:ed. 3
ambient air temperature for operation	-10-60 °C
device application	energy monitoring
Communication Port Protocol	Modbus at 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps even/odd or none - 2 wires, insulation 2500 V
ambient air temperature for storage	-20-70 °C
Type of Installation	indoor installation
depth	13 mm outside: , 49 mm panel:
width	96 mm
Display Type	8 segments LED
device short name	PM1125H
Targeted Country	all
Wire Stripping Length	current circuit: 3.68 mm, voltage circuit: 7 mm, control circuit: 7 mm, 7 mm
range	EasyLogic
Material	polycarbonate
connections - terminals	current circuit: screw clamp terminals (bottom) 2.08-3.31 mm² cable(s) , voltage circuit: screw clamp terminals (top) 0.82-3.31 mm² cable(s) , control circuit: screw clamp terminals (top) 0.82-3.31 mm² cable(s) , communication: screw clamp terminals (bottom) 0.33-3.31 mm² cable(s)
tightening torque	current circuit: 0.9-1 N.m Philips No 2 screwdriver , voltage circuit: 0.9-1 N.m Philips No 2 screwdriver , control circuit: 0.9-1 N.m Philips No 2 screwdriver , communication: 0.5-0.6 N.m Philips no 1 screwdriver