29452 Schneider Electric auxiliary contact - 1 OC or 1 SD or 1 SDE or 1 SDV low level
29452 Schneider Electric auxiliary contact - 1 OC or 1 SD or 1 SDE or 1 SDV low level
Old Price: AED 105.000
New Price: AED 83.000 (21%)
Auxiliary contact - 1 OC or 1 SD or 1 SDE or 1 SDV low level
It is a single low-level auxiliary contact that provides all the different indications remotely for Compact NSX, Compact NS, PowerPact Multistandard and EasyPact CVS circuit breakers. Remote status information are ON/OFF (OF), trip indication (SD) and fault-trip indication (SDE) for all circuit breakers types. The remote status information for trip indication due to an earth fault (SDV) is used for Compact NSX and PowerPact Multistandard. The contacts are installed in the device in dedicated slots. This auxiliary contact is a common point changeover type contact with 1 normally open contact and 1 normally closed contact. The rated current is 5A and the minimum load is 1MA at 4 VDC for utilization categories AC12/AC15/DC12/DC14. One device embeds 5 auxiliaries contact type. It complies with IEC 60947-5-1 standard.
Product or component type | Auxiliary contact |
---|---|
Device short name | SD SDV OF SDE |
Device application | Breaker status monitoring |
Range compatibility | ComPact ComPact NS630b...1600 ComPact ComPact NS1600b...3200 ComPact ComPacT INS ComPact Compact INV ComPact ComPact NSX EasyPact EasyPact CVS PowerPact PowerPact Multistandard ComPact ComPact NSX DC |
Signal contacts composition | 1 NO/NC |
Range compatibility | Galaxy PX Galaxy VL Galaxy VM Galaxy VS Galaxy VX |
Fault type | General electric fault |
---|---|
Local signalling | ON/OFF indication for open/close Trip indicator for relay trip indicator Fault trip for electrical fault |
Auxiliary contacts type | Low level |
Mounting mode | Clip-on |
[Ith] conventional free air thermal current | 5 A |
Breaking capacity (A) | AC-12: 5 A at 24 V AC 50/60 Hz AC-12: 5 A at 48 V AC 50/60 Hz AC-12: 5 A at 110 V AC 50/60 Hz AC-12: 5 A at 220/240 V AC 50/60 Hz AC-12: 5 A at 380/440 V AC 50/60 Hz AC-12: 5 A at 480 V AC 50/60 Hz AC-15: 3 A at 24 V AC 50/60 Hz AC-15: 3 A at 48 V AC 50/60 Hz AC-15: 2.5 A at 110 V AC 50/60 Hz AC-15: 2 A at 220/240 V AC 50/60 Hz AC-15: 1.5 A at 380/440 V AC 50/60 Hz AC-15: 1 A at 480 V AC 50/60 Hz DC-12: 5 A at 24 V DC DC-12: 2.5 A at 48 V DC DC-12: 0.6 A at 110 V DC DC-12: 0.3 A at 250 V DC DC-14: 1 A at 24 V DC DC-14: 0.2 A at 48 V DC DC-14: 0.05 A at 110 V DC DC-14: 0.03 A at 250 V DC |
Minimum load | 1 mA at 4 V DC |
Accessory / separate part category | Spare part for Compact NS630b...1600 Spare part for Compact NS1600b...3200 |
Unit Type of Package 1 | PCE |
---|---|
Number of Units in Package 1 | 1 |
Package 1 Height | 1.400 cm |
Package 1 Width | 7.800 cm |
Package 1 Length | 6.000 cm |
Package 1 Weight | 22.000 g |
Unit Type of Package 2 | BB1 |
Number of Units in Package 2 | 10 |
Package 2 Height | 5.000 cm |
Package 2 Width | 14.500 cm |
Package 2 Length | 17.000 cm |
Package 2 Weight | 228.200 g |
Unit Type of Package 3 | S02 |
Number of Units in Package 3 | 100 |
Package 3 Height | 15.000 cm |
Package 3 Width | 30.000 cm |
Package 3 Length | 40.000 cm |
Package 3 Weight | 2.500 kg |
Warranty | 18 months |
---|
You may also like

29452 Schneider Electric auxiliary contact - 1 OC or 1 SD or 1 SDE or 1 SDV low level

LADR2 Schneider Electric Time delay auxiliary contact block, TeSys D, 1NO + 1NC

LAEM7 Schneider Electric EasyPact TVS - mechanical interlock - for LC1E300…E500

LAEM6 Schneider Electric EasyPact TVS - mechanical interlock - for LC1E200…E250

LAEM4 Schneider Electric EasyPact TVS - mechanical interlock - for LC1E80…E95

LA1KN40 Schneider Electric Auxiliary contact block, TeSys K, 4NO, front mounting

LA1KN31 Schneider Electric Auxiliary contact block, TeSys K, 3NO + 1NC, front mounting

LA1KN20 Schneider Electric Auxiliary contact block, TeSys K, 2NO, front mounting

LA1KN13 Schneider Electric Auxiliary contact block, TeSys K, 1NO + 1NC, screw terminals

LA1KN04 Schneider Electric Auxiliary contact block, TeSys K, 4NC, front mounting

LA1KN02 Schneider Electric Auxiliary contact block, TeSys K, 2NC,front mounting

GVAN11 Schneider Electric TeSys GV2 & GV3 - auxiliary contact block - 1 NO + 1 NC

GVAD1010 Schneider Electric TeSys GV2 & GV3 - auxiliary contact - 1 NO + 1 NO (fault)

GVAD1001 Schneider Electric TeSys GV2 & GV3 - auxiliary contact - 1 NC + 1 NO (fault)

GVAD0110 Schneider Electric TeSys GV2 & GV3 - auxiliary contact - 1 NO + 1 NC (fault)

LADT4 Schneider Electric Time delay auxiliary contact block, TeSys D, 1NO + 1NC
